Union Butterfield 4536 High-Speed Steel Chucking Reamer, Straight Flute, Morse Taper Shank, Uncoated (Bright), 19/32 inch
Sorry, this item is no longer available.
Search our site to find another great deal. But hurry! With our low prices, we sell out fast!
Please note: BLINQ sells products in multiple conditions (new, open box, refurbished, etc). Not all reviews are reflective of the condition that you may purchase.
The Union Butterfield 4536 high-speed steel straight flute chucking reamer (also called a machine reamer) is an uncoated (bright) Morse taper shank tool with a 45-degree bevel lead, commonly used for general-purpose reaming of uninterrupted cuts. Straight flute reamers make small, circular, and precise enlargements to through holes (extending through the workpiece) and blind holes (with only one opening). High-speed steel (HSS) is a common, general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provide an economical alternative to coated tools.
Taper shank tools can be self-holding or self-releasing based on the degree of taper: Small tapers are self-holding within a tool holder, while large tapers are self-releasing and will easily release from the tool holder. The shank end of a Morse taper shank tool is self-holding because friction between the tool and the tool holder prevents slippage. It is tapered to ensure accurate alignment of the tool in the socket of the tool holder. This reamer has a 45-degree bevel at the cutting tip to facilitate entry to pre-drilled holes.
In the Union Butterfield 4536 series, reamers 0.2500 to 0.5312 in diameter have six flutes, 0.5625 to 1.0625 in diameter have eight flutes, and 1.1250 to 1.5000 in diameter have 10 flutes. Tolerances for reamers up to 0.5000 are +0.0002 to -0.0000 ; larger than 0.0500 and up to 0.7500 are +0.0003 to -0.0000 ; and larger than 0.7500 up to 1.5000 are +0.0004 to -0.0000 . There is an exception for reamers that are dowel-pin sized; their tolerances are +0.0000 to -0.0002 .
Reamers are used to finish existing holes. When holes are created using common applications such as drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameters may be slightly smaller than required. Reamers are made to exacting tolerances so they can correct such errors and create precisely round holes with exact dimensions. Reaming is often used before tapping screw threads.
Precision manufactures machine tools under the following brands: Precision Twist, Precision Dormer, and Union Butterfield. They have locations around the world, and provide tools adhering to ANSI, NAS, and DIN standards.
- Union Butterfield
May We Also Suggest
How BLINQ Works
- Retailer needs to move overstock, open box & refurbished inventory.
- BLINQ receives inventory and professionally inspects each item.
- Condition is determined, with only the best items passing inspection.
- Item is heavily discounted on BLINQ.com to sell quickly.