Apollo 82-200F1 Series Bronze Ball Valve with Brazed Extensions And One Gauge Port, Three Piece, Inline, Lever, 1" Solder End
A savvy shopper from WA snagged this deal before you could.
Search our site to find another great deal. But hurry! With our low prices, we sell out fast!
Please note: BLINQ sells products in multiple conditions (new, open box, refurbished, etc). Not all reviews are reflective of the condition that you may purchase.
The Apollo 82-200F1 series bronze three-piece inline ball valve has a latch-lock lever handle, one gauge port, and brazed male extensions with solder ends. The body of this valve is made of bronze for higher strength and corrosion resistance than brass, and the ball and stem are made of stainless steel 316 for greater corrosion resistance than standard steel. The extensions are made of Type K copper tubing for brazing to copper tubing using Sil-Fos (silver-copper-phosphorous) brazing filler metal. The valve has a three-piece body to allow inline repairs, and a stainless steel latch-lock lever handle for manual on/off control. The lever handle and nut are made of stainless steel for strength and greater corrosion resistance than zinc-plated steel, and the lever can be locked in either the open or closed position. This valve is oxygen cleaned to reduce the risk of fire in oxygen-enriched environments, and has a 1/8 diameter brass gauge port on the upstream extension for use with a pressure gauge. It is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. Reinforced polytetrafluoroethylene (RPTFE) seats and seals reduce the possibility of leakage. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for cold working pressure (CWP), and the temperature range is -20 to 450 degrees Fahrenheit. This ball valve is for use in medical gas and clean room applications and meets standards CGA G4.4, NFPA 99, and MSS SP-110 for quality assurance.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.
- Apollo Valve
May We Also Suggest
How BLINQ Works
- Retailer needs to move overstock, open box & refurbished inventory.
- BLINQ receives inventory and professionally inspects each item.
- Condition is determined, with only the best items passing inspection.
- Item is heavily discounted on BLINQ.com to sell quickly.